MEGAGO PROUDLY PRESENTS : MEGAGO CFW 4.50 Final Version Fixed CFW 3.41+.PUP
Megago CFW 4.50 Final Version Fixed
This CFW was tested on most PS3 Models by different testers and no problems were encountered.
But as any CFW release you must install it with caution and by following proper instructions, No one will be held responsible for any damage caused.
Do not leave a disc in the console during the update. Because the PS3 will first look for the update on the disc.
1. Made out of 4.50 ofw
2. Original Coldboot changed for Megago Coldboot created by hideki2009 (ps3gunz)
3. This CFW can be installed fine from XMB Update over OFW 3.55 or any CFW ver <= 3.41/3.55/4.21/4.30/4.40/4.41/4.46/4.50
4. HDD can be swapped/changed and the CFW will re-install without any problem.
5. Have install package files and app_home
6. ReactPSN patch to work offline without the need to log into PSN at all.
7. Patched all coreos ecdsa check
8. Patched lv2 to add peek/poke supoort
9. Patched lv1 to disable lv2 protection
10. Patched lv1 to add peek/ poke support
11. It can run games signed with Keys up to version 4.50 without any Eboot/Sprx patching needed
12. Can be updated over 3.55 ofw
13. noBD/noBT patches to allow installation on consoles with broken BluRay Drive or Bluetooth board
14. RSOD screen bypass patch for RSOD machines (it won't fix the RSOD but allows the PS3 to boot fine into XMB)
15. PSN/SEN access is available but it's not recommended
16. ReActPSN offline patch added
17. Better system stability
18. PSP remaster support added
19. QA flag enabled by default if PS3 was QA on 3.55
20. Removed remote play restriction
21. Added XMB InGame ScreenShot Feature.
22. Cinavia Disabled for HDD content only using the DEX files
WARNING:
1.This CFW does have LV1 checks disabled and can be installed on Downgraded PS3 consoles even if not dehashed after downgrade (qa flag).
2.Always make a NOR/Nand dump using multiMAN before installing any CFW to have a recovery backup in case of any bricks.
Having a valid NOR/Nand dump is an essential step before upgrading, because you will always have a chance to recover when you have a valid dump.
** A Hardware Flasher alone without a valid dump may not fix your bricked PS3 **
3.Please Check the MD5 of the downloaded PUP file before installing any CFW to avoid possible bricks.
4.DO NOT HAVE DISC IN PS3 WHEN UPDATING FIRMWARES..As the PS3 will take the UPDATE from the DISC First.
5.You need to be already on a 3.55OFW or 3.55/4.21/4.30/4.40/4.50 CFW to install this.
Installing from any OFW > 3.55 won't work. (Hardware Flasher needed)
Downgrading back to CFW 3.55 from any CFW Please refer to : ROGERO DOWNGRADER PUP
MD5 : 0ad0097a5ae12843c36dae3fbe94899b
SIZE : 193 MB (203 112 448 bytes)
Download :
I'M MEGAGO BITCH !!!
Thanks to :
GregoryRasputin
RedDot-3ND7355
Dantezteam
Hideki2009 for the coldboot
BETA-TESTEURS : waaaaayy` #SL16
and my all followers (@mamscdt)
Megago CFW 4.50 Final Version Fixed
This CFW was tested on most PS3 Models by different testers and no problems were encountered.
But as any CFW release you must install it with caution and by following proper instructions, No one will be held responsible for any damage caused.
Do not leave a disc in the console during the update. Because the PS3 will first look for the update on the disc.
1. Made out of 4.50 ofw
2. Original Coldboot changed for Megago Coldboot created by hideki2009 (ps3gunz)
3. This CFW can be installed fine from XMB Update over OFW 3.55 or any CFW ver <= 3.41/3.55/4.21/4.30/4.40/4.41/4.46/4.50
4. HDD can be swapped/changed and the CFW will re-install without any problem.
5. Have install package files and app_home
6. ReactPSN patch to work offline without the need to log into PSN at all.
7. Patched all coreos ecdsa check
8. Patched lv2 to add peek/poke supoort
9. Patched lv1 to disable lv2 protection
10. Patched lv1 to add peek/ poke support
11. It can run games signed with Keys up to version 4.50 without any Eboot/Sprx patching needed
12. Can be updated over 3.55 ofw
13. noBD/noBT patches to allow installation on consoles with broken BluRay Drive or Bluetooth board
14. RSOD screen bypass patch for RSOD machines (it won't fix the RSOD but allows the PS3 to boot fine into XMB)
15. PSN/SEN access is available but it's not recommended
16. ReActPSN offline patch added
17. Better system stability
18. PSP remaster support added
19. QA flag enabled by default if PS3 was QA on 3.55
20. Removed remote play restriction
21. Added XMB InGame ScreenShot Feature.
22. Cinavia Disabled for HDD content only using the DEX files
WARNING:
1.This CFW does have LV1 checks disabled and can be installed on Downgraded PS3 consoles even if not dehashed after downgrade (qa flag).
2.Always make a NOR/Nand dump using multiMAN before installing any CFW to have a recovery backup in case of any bricks.
Having a valid NOR/Nand dump is an essential step before upgrading, because you will always have a chance to recover when you have a valid dump.
** A Hardware Flasher alone without a valid dump may not fix your bricked PS3 **
3.Please Check the MD5 of the downloaded PUP file before installing any CFW to avoid possible bricks.
4.DO NOT HAVE DISC IN PS3 WHEN UPDATING FIRMWARES..As the PS3 will take the UPDATE from the DISC First.
5.You need to be already on a 3.55OFW or 3.55/4.21/4.30/4.40/4.50 CFW to install this.
Installing from any OFW > 3.55 won't work. (Hardware Flasher needed)
Downgrading back to CFW 3.55 from any CFW Please refer to : ROGERO DOWNGRADER PUP
MD5 : 0ad0097a5ae12843c36dae3fbe94899b
SIZE : 193 MB (203 112 448 bytes)
Download :
Vous devez être inscrit pour voir les liens ! Inscrivez-vous ou connectez-vous ici.
I'M MEGAGO BITCH !!!
Thanks to :
GregoryRasputin
RedDot-3ND7355
Dantezteam
Hideki2009 for the coldboot
BETA-TESTEURS : waaaaayy` #SL16
and my all followers (@mamscdt)
! Video de presentation sera la bienvenue